Application Instructions - Waterslide Decals

Click Here to order these transfers directly from us

As these transfers are printed with a laser printer, they are inherently waterproof and do NOT require pre-sealing before using like with inkjet printed transfers.

  • Cut around the picture/design as closely as possible.
  • Put the transfer in water for 30 seconds. The paper will roll up. TIP - Using warmer water will make the transfer film slightly more pliable and stretchy. 
  • Rub it carefully between the fingers in order to remove the transfer foil.
  • Now you can position the foil on the desired surface. 
  • For larger designs, try and slide off the transfer directly on to the substrate.
  • To avoid air bubbles, streak with your fingers or a soft rubber squeegee over the foil.
  • Remove leftover water, you can dab the transfer with a soft sponge.
  • Allow to dry for 3 hours.
  • To make the transfers more durable, cover them with a clear coat lacquer/seal of your choice. 

Note

  • Our waterslide decals can be used with most decal solutions such as Micro Set, Micro Sol, DecalFix & other adhesives and softeners

Please click here to find out even more about our Waterslide Decals